GeoVISION™ On
Screen Camera Depth Display (OSD) Option
Standard
with the GeoVISION™ Deluxe winch
The
improved 2007 model has greater accuracy and displays in both tenths of feet
and tenths of meters.
|
|
|
|
OSD encoder & casing clamp |
Power Supply and OSD control box |
The camera depth on-screen
camera depth display (OSD) is a standard component of all GeoVISION™
Deluxe systems. It is an option with the Econo Heavy duty system and is not
available with the Econo Light Duty system. The OSD will place the
camera’s depth in feet or meters in any one of five locations on the
video screen and will appear on the recorded video. The numeric display can be
located in the center of the screen, in any one of the four corners, or not
shown by pushing a button to cycle through these alternative locations. It is
supplied with the footage counter encoder/wheel/clamp assembly. The OSD
controls are incorporated in the control panel of the power supply control box.
It has a count reset button on it and if you press the reset button for longer
than 5 seconds the display will start counting up from zero until released. All
necessary cables and instructions are included.
Accuracy
The
GeoVISION™ OSD is guaranteed accurate within one percent at any depth.
Under most conditions it will be much more accurate. The display shows either
feet or meters with one decimal point.
Color Jr images showing OSD footage
Specifications are subject to change without notification.
For
product information, sales, brochures, demo DVD, and prices on all of our
products you may:
- E-